The School of Physics and Applied Physics offers graduate programs leading to the Master of Science degree with a major in physics and to the Doctor of Philosophy degree in Applied Physics.
This program requires a $65 application fee that must be submitted with the application for Admissions to Graduate Study in Physics. Applicants must pay this fee by credit card.
Master of Science (M.S.) in Physics
In order to be considered for admission into the M.S. in Physics program, students must have a baccalaureate degree in Physics or equivalent. The applicant must have earned a grade point average (GPA) of 2.70 or better (A=4.00) on approximately the last 60 credit hours of undergraduate work. Applicants for admission to the M.S. in Physics program are strongly encouraged to submit GRE scores together with other application materials.
In addition to the general requirements of the Graduate School for the M.S. in Physics degree, the student must complete PHYS 500A (or mathematics equivalent), PHYS 510, PHYS 520A, PHYS 520B, and PHYS 530A, PHYS 530B.
For the M.S. in Physics, a thesis is required, based upon not more than six nor less than three hours of PHYS 599-level credit. The PHYS 599 credit requirement is in addition to the minimum 15-credit hour requirement at the 500 level as stated in this catalog and should be distributed preferably over several terms of enrollment.
Each candidate for an M.S. in Physics degree is required to pass an examination, written or oral or both, covering graduate work including the thesis; the examination is administered by the student’s thesis committee.
Each candidate for an M.S. in Physics degree is required to earn one credit in PHYS 581 by lecturing in the graduate seminar. An oral thesis defense satisfies this requirement.
Non-Thesis/Research Paper Option
In order to be considered for admission into the M.S. in Physics Non-Thesis Option program, students must have a baccalaureate degree in Physics, or equivalent.
In addition to the general requirements of the Graduate School for the M.S. in Physics Non-Thesis Option degree, the student must complete PHYS 425, PHYS 450, PHYS 500A (or mathematics equivalent), PHYS 510, PHYS 520A, PHYS 520B and PHYS 530A. Those students enrolled in the M.S. in Physics Non-Thesis Option who have taken PHYS 425 and/or PHYS 450 as part of their undergraduate curriculum may replace those courses with any other 500-level course and/or 400-level course (after consulting with their respective advisory committee).
An advanced experimental or computational, or theoretical project resulting in a research paper is required, based upon not less than four credit hours of PHYS 598. The research paper has to be completed by the end of the second year in the program. It should be written as a standard scientific text (i.e., with appropriate referencing), and it should be between 15 and 20 pages in length. The research paper should explain in detail the project undertaken by the student enrolled in the M.S. in Physics Non-Thesis Option and must contain background and motivation (with proper literature review), and problem statement and goals of the project, results, a discussion related to the work undertaken in accomplishing the goals and objectives, conclusions and plans for future work. The style that should be used is that appropriate for a manuscript submitted to Phys. Rev.
Further, it is also noted that the outcome of the project (in the form of the research paper) has to be approved by the student’s advisory committee. Once the research paper is approved, an electronic version of the research paper must be filed in the Graduate School by submission at Open SIU.
Other specific requirements for the M.S. in Physics Non-Thesis Option are as follows: Each candidate for an M.S. in Physics Non-Thesis Option degree is required to have a CGPA of 3.0 (in 4.0 scale) throughout the program.
Doctor of Philosophy (Ph.D.) in Applied Physics
Program Description and Objectives
The School of Physics and Applied Physics offers a graduate program at the doctoral level leading to the Ph.D. in Applied Physics. The Applied Physics doctoral program is designed to provide advanced studies both in the application of the concepts and methods of physics to various research areas, including: materials, nanoscience and nanotechnology, quantum computing, quantum error correction, quantum optics and information, computational materials physics, biomedical physics, condensed matter physics, magnetism, thin films, and in the application of the methods and techniques of physics to the study of industrial processes and products. The Ph.D. in Applied Physics provides students with broad, in-depth knowledge of the fundamentals of those areas of physics relevant to applications, as well as with advanced specialized knowledge in applied areas. The ultimate goal of this program is to produce graduates that are competent scientific researchers in Applied Physics, i.e., researchers that are capable of initiating and completing an independent investigation in a specific sub-field of Applied Physics. The graduates of this program will be able to fill the needs of academia, industry and government in the area of Applied Physics.
Applicants will be admitted into the Ph.D. in Applied Physics following one of three routes:
- Direct admission: this option requires the applicant to have completed a Bachelor’s degree in Physics (or its equivalent) with a grade point average of at least 3.25 (in exceptional cases, the School may solicit the Graduate School to waive this requirement).
- Accelerated admission: students are admitted into the Master’s degree program and after one semester they can be considered for admission into the doctoral program if they show exceptional research potential and have accumulated a GPA of 3.25.
- Regular admission: for students who have completed a M.S. in Physics or equivalent and have accumulated a GPA of 3.25 in graduate level courses (in exceptional cases, the School may solicit the Graduate School to waive this requirement). The students obtaining their M.S. in Physics at SIUC will have satisfied most of the core course requirements for the Ph.D. in Applied Physics.
All applicants for admission to the doctoral program in Applied Physics must submit Graduate Record Examination (GRE) scores together with other required application materials.
In addition to the general requirements of the Graduate School, the student must complete a sequence of Required Basic Core Courses, and Elective Courses that includes:
Required Basic Core Courses
- PHYS 500A: Mathematical Methods in Physics (3 CH)
- PHYS 510: Classical Mechanics (3 CH)
- PHYS 520A, PHYS 520B: Electromagnetic Theory (6 CH)
- PHYS 530A, PHYS 530B: Quantum Mechanics II (6 CH)
In addition, students are required to complete one additional course (3 CH only) from those in the following list:
- PHYS 550: Computational Physics
- PHYS 545A: Statistical Mechanics II (3 CH only)
- PHYS 565A: Solid State Physics II (3 CH only)
- SCI 501A, SCI 501B: Research Transmission Electron Microscopy
- SCI 502A, SCI 502B: Research Scanning Electron Microscopy
- PHYS 575: Special Topics in Physics: Magnetism and Magnetic Materials
- PHYS 575: Special Topics in Physics
- PHYS 575: Special Topics in Physics: Spectroscopy of Materials
- PHYS 575: Special Topics in Physics: Surface Science
- PHYS 575: Special Topics in Physics: Quantum Computing
- PHYS 575: Special Topics in Physics: Hybrid Materials
- PHYS 575: Special Topics in Physics: Advanced Optics
The following courses are not allowed to count as electives: PHYS 599 (Thesis), PHYS 600 (Dissertation), and PHYS 601 (Continuing Enrollment).
Starting no later than the beginning of the third semester in the program, students will be required to enroll for two consecutive semesters in PHYS 570, a 3-credit hour per semester Special Project course.
In addition to the above-described coursework, while working on their dissertation, the students must complete 24 credit hours of PHYS 600 (Dissertation) in no less than two academic years of full-time work.
Admission to Candidacy
To be admitted to candidacy, the prospective doctoral candidate must satisfactorily complete the Qualifying Procedure. The Qualifying Procedure includes:
- Three written examinations
- A research proposal
- The student’s performance in Required Basic Core courses
- The recommendation of the research advisor (if the student has a research advisor).
1. Three written examinations:
The students will take three written exams. The exams are chosen by the student from the following five possible topics: Quantum Mechanics, Classical Mechanics, Statistical Mechanics, Electromagnetic Theory and Solid State Physics.
The students will have to select three out of the five exams to take (i.e., they will not be allowed to pick the best three out of four or five).
The students will have to pass the three exams, as evaluated and determined by the Graduate Committee.
These written exams will be prepared at the undergraduate level. That is, at a level that is consistent with the corresponding courses at the 200-, 300-, 400- level at SIU.
The level will be specified by the corresponding textbooks used in these courses at SIU.
For Classical Mechanics, Halliday and Resnick (or equivalent) specifies the 200- level and Symon or Thornton and Marion specifies the 300- and 400- level;
For E+M Theory, Halliday and Resnick (or equivalent) specifies the 200- level and Lorrain and Corson, or Griffiths or equivalent specifies the 300- and 400- level;
For Statistical Mechanics, at the 400-level only, “Thermal Physics” by Kittel and Kroemer specifies the level;
For Quantum Mechanics at the 300-level “Modern Physics” by Serway, Moser, and Moyer or equivalent, specifies the level, and “Introduction to Quantum Mechanics” (Second Edition), by David J. Griffiths specifies the 400 level.
For Solid State Physics, at the 400-level, only “Introduction to Solid State Physics” by Kittel specifies the level.
The written exams will consist of a set of questions from which the students will get to choose a subset that they will answer. Where it is applicable (i.e., for Classical Mechanics, E+M and Quantum), some of the questions will be at the 200- level and others at the 300- and 400- level.
The written exams will be held one per day over the course of a week.
2. A written research proposal:
The research proposal has to be completed by the end of the second year in the program.
It should be written as standard scientific text (i.e., with appropriate referencing), and it should be between 10 and 15 pages in length.
The style that should be used is that appropriate for a manuscript submitted to Phys. Rev.
3. Course performance:
The course performance of the student in the required classes for the program has to be completed. (Must have a grade point average of 3.25 (out of 4) in the basic core curriculum in Applied Physics).
If the student is engaged in research by the end of the first year in the program, the recommendation of the research advisor pertaining to research progress.
Students are expected to have completed the Qualifying Procedure by the end of the fourth semester in the doctoral program.
Students are required to take the exam at the end of their first Spring semester in the program.
The written exam portion of the Qualifying Procedure will be prepared and administered by an examination committee appointed by the Chair.
The written exam portion of the Qualifying Procedure will be held on a yearly basis, generally in early August.
Students will be allowed to participate in the exam portion of the qualifying procedure twice. The one exception to the above rule is that students who so desire can have a “free trial” at the Qualifying Examination by taking it at the beginning of their first semester in the program without this instance counting as one of the two allowed opportunities to take the exam. Students are encouraged to attempt the written exam portion of the Qualifying Procedure as early as the beginning of their first semester in the program in order to make use of the free option.
Students will be allowed to change one exam area (of the three) per each time they take the exams. This adds up to a maximum total of two changes, if the student takes the exams in the free trial. Note that what is limited to two times (or to three times, if the student takes advantage of the free trial) is the number of times the student can participate in the qualifying exam procedure; i.e. it is not that the student can repeat two times each individual exam. The students can participate in the exam process twice (or three times with the free trial) and must pass three exams at the end of their tries.
Those students who start at SIUC in the Spring semester will have their free trial at the beginning of the following Fall; they will be required to take this free trial.
Students who complete the M.S. in Physics degree at SIUC and then proceed to the Ph.D. in Applied Physics will be considered as incoming doctoral students for the purpose of the free trial exam. They will, however, be required to take this free trial.
Those students who begin at SIUC in the Fall can have their free trial only in the Fall in which they start.
The Graduate Committee will evaluate all four points of the Qualifying Procedure for each student applicant and will decide on admission to candidacy for each applicant. The Graduate Committee will decide on what weight will be given to the different portions of the Qualifying Procedure.
Upon successful completion of the Qualifying Procedure, the School will request the Graduate School to admit the student to candidacy for the doctoral degree, once the applicant has completed the required 24 credit hour residency period.
Dissertation Committee and Dissertation Examination
No later than six months after admission to candidacy, the student will request the appointment of a dissertation committee to supervise the student’s dissertation. This committee will include five faculty members, with at least one from outside the School of Physics and Applied Physics, at least one doing research in theoretical physics, and at least one doing research in experimental physics. The majority of the committee shall consist of faculty members from the School of Physics and Applied Physics. The committee will be chaired, in most cases, by the student’s dissertation supervisor. The committee will meet within two months after its formation to determine if any specific coursework, beyond the core curriculum, is to be required of the student, and to determine if any special requirements might be appropriate for the student’s particular research area. At this time (i.e., no later than eight months after admission to candidacy), the committee will be given a formal, written dissertation proposal and an oral presentation on the proposed research by the student.
Upon completion of a dissertation demonstrating the student’s ability to conduct independent research, the dissertation committee will administer a final oral examination. This oral examination shall consist of a defense of the dissertation. Upon the satisfactory completion of both the dissertation and the final examination, the committee will recommend the student for the doctoral degree.